Mimaki DTF TXF 150-75
75cm Heat Transfer Inkjet Printer (DTF) | PHT50 ECO PASSPORT Pigment Ink | MCT Version 2 White Ink Circulation | NCU/NRS | RasterLink7 | Variable Print | Cotton / Polyester / Nylon — Any Fabric
OVERVIEW
The Mimaki TxF150-75 is Mimaki’s DTF (Direct-to-Film) heat transfer inkjet printer — a fundamentally different technology from Mimaki’s sublimation range (TS100, TS55, TS330). Where sublimation requires polyester fabric, DTF prints on cotton, polyester, blended fabrics, nylon, and virtually any fabric — with no pre-treatment, no plate making, and no weeding. The TxF150-75 uses Mimaki’s own PHT50 heat transfer pigment ink (ECO PASSPORT certified) in a 5-color CMYK+W configuration, with Mimaki Circulation Technology Version 2 (MCT V2) keeping white ink in constant circulation through the entire ink route including the damper — preventing the sedimentation that causes white channel nozzle failures in DTF printing. Backed by NCU/NRS auto nozzle management and RasterLink7 with special color plate generation (Fill-in-contour), it is designed for reliable unattended DTF production across garments, sportswear, bags, and accessories.
- TECHNICAL SPECIFICATIONS
- WHY CHOOSE Mimaki DTF TXF 150-75?
| Model | TxF150-75 |
| Brand | Mimaki Engineering Co., Ltd. |
| Technology | DTF (Direct-to-Film) Heat Transfer Inkjet Printer |
| Print Head | On-demand piezo head |
| Printing Resolution | 720 dpi 1,440 dpi |
| Ink Type | Heat transfer pigment ink PHT50 (C, M, Y, K, W) |
| Ink Capacity | 600 ml aluminium pack (C/M/Y/K) 500 ml aluminium pack (W) |
| Ink Circulatory Function | White ink only — MCT Version 2 (full circuit including damper) |
| Maximum Drawing Width | 800 mm (white layer) |
| Maximum Media Width | 810 mm |
| Media Thickness | 1.0 mm or less |
| Roll Weight | 45 kg (99 lb) or less |
| Interface | Ethernet 1000BASE-T USB 2.0 Hi-speed |
| Power Supply | Body: Single-phase AC100–120V / AC200–240V ±10%, 50/60Hz ±1Hz × 1 |
| Power Consumption | AC100V: 0.9 kW or less AC200V: 1.2 kW or less |
| Certifications | VCCI Class A FCC Class A ETL IEC 62368-1 CE Marking (EMC, Low Voltage, Machinery, RoHS) CB REACH ENERGY STAR RCM KC |
| Dimensions (W×D×H) | 1,965 × 700 × 1,392 mm (77 × 27 × 39 in) |
| Weight | 126 kg |
| Reliability Systems | MCT Version 2 (white ink circulation) NCU (auto nozzle check) NRS (auto nozzle recovery) |
| White Layer Adjustment | Size: Thickening / Thinning Position: Scan (left/right) / Feed (front/back) |
| RIP Software | RasterLink7 (bundled) — with Fill-in-Contour special color plate generation |
Description
MCT V2 — Full Circuit White Ink Circulation
- Mimaki Circulation Technology Version 2 circulates white ink through the ENTIRE ink route including the damper above the head — not just stirring in the tank. Prevents pigment sedimentation at every point in the system. Reduces nozzle cleaning frequency and ink waste significantly.
PHT50 — Mimaki’s First Heat Transfer Pigment Ink
- PHT50 is Mimaki’s own pigment ink for DTF, ECO PASSPORT certified. Aluminium pack format: degassed ink reduces gas contamination and nozzle defects. Reduces plastic waste vs. bottles. Secured by Mimaki’s genuine ink support network.
Print on Any Fabric — No Pre-Treatment
- Cotton, polyester, poly-cotton blends, nylon, and more — dark or light colors. No fabric selection constraint. No pre-treatment spray needed. Denser color on dark T-shirts including black. Weeding unnecessary (vs. rubber transfer sheet method).
NCU/NRS — Uninterrupted Production
- NCU sensor detects nozzle defects and triggers automatic cleaning. NRS substitutes a defective nozzle with an alternate nozzle for continuous production without waiting for a service engineer. Stable unattended operation.
RasterLink7 — Fill-in-Contour Special color Plate
- New Fill-in-Contour option in RasterLink7 converts CMYK=0% objects and vector data into special color plates (white underlay generation). Three modes: Whole Image, Valid Pixel, Fill in Contour. Supports EPS, PS, PDF file formats.
Variable Print — One Item per Uniform
- Template design + individual variable data (name, number) for personalised sportswear and team wear. Print unique names and numbers on each DTF film sheet. Same variable print function as Mimaki’s sublimation range.
